When adding oil to the machine, more attention should be paid plastic oil funnels to the use of proper oil cleaning procedures and oil transfer equipment. The type of tools used to refuel machinery is one of the biggest concerns of industry experts-the use of plastic or metal funnels for fuel delivery is a typical problem that must be avoided at all costs.The reusable hopper collects dust particles because they are usually kept in utility vehicles and lockers. When using a funnel, always use a high-quality disposable type that can be discarded after each use. In addition, open-top and galvanized containers can also cause oil cleaning problems.When the oil is delivered to the galvanized container, the oil additive will adhere to the container and separate from the oil.
The open top container allows contaminants present in the air to contaminate the oil before it is transferred to the machine. First, it is important to determine the lubricant to be used and ensure that it matches the equipment being filled. After choosing a suitable transfer container, please make sure it is clean and tidy before filling. After all, you don’t want to remove the filtered oil from the bulk oil storage system and add it to the S&R container, which has been covered for a period of time to collect moisture or dirt.
Avoid using the same container to store oil in your facility. After filling the container, make sure to seal it properly and close the nozzle. Any oil spilled on the outside of the container should be wiped clean immediately. Finally, determine the amount of oil required by your machine, which will let you know how much oil you have added to the equipment and how much has been lost in the process. Before refueling your equipment, make sure that the entire area and tools are free of contaminants that may enter the system after opening. Don't forget to verify that the label on the device matches the label on the S&R container. Using the wrong lubricant or causing cross-contamination can have catastrophic consequences for your equipment.
When refueling the machine, slowly open the refueling port, paying attention to potential contaminants such as dirt, dust, and debris that may enter the system. Use the oil injection port of the equipment to adjust the water outlet of the container to avoid contact, and start the oil delivery process slowly. Observe the oil level indicator carefully to understand how much oil has been added and how much you need to add.The oil moves slowly due to increased viscosity, so you need to allow the oil level to catch up and avoid filling up the equipment. After reaching the required oil level, stop refueling the machine and close the water outlet on the container. Make sure that the lubricant label is still visible and in working condition.
